Bed Rail Connection System
|37928||Bed Rail Connection System||$12.99|
Bed Rail Connection System kit includes 5/16" threaded inserts, threaded rod, nuts and slotted washers for 4 bed rail joints, plus 8 wood dowels. To install, drill a 35mm (1-3/8") flat-bottom hole and perpendicular 5/8" through-hole in the bed rail, and a 17/32" hole in the bed post to house the threaded insert.
Screw the 5/16-18 x 3-1/2 threaded stud into the insert until it stops. Put the nut 3 to 6 turns onto the end of the threaded stud.
Slide the rail over the nut and into mating holes for dowels on the bed post.
Slide the curved washer in place as shown and tighten the nut with the wrench provided.
To speed installation and ensure accurate drilling, use the Rockler JIG-IT Drill Guide and 35mm Long Shank Forstner Bit for the bed rail boring. The JIG-IT sets up quickly to produce accurately placed, flat-bottom holes in the exact depth required.
Click here for details
All brands and product names are trademarked or registered trademarks of their respective companies.
Prices, specifications, and availability are subject to change without notification. E.&O.E.
Description provided by and used with permission from Rockler Companies, Inc..
Thursday, March 22, 2012.
This page is at http://southern-woodcrafts.com/go/25449